UHU Spray Glue (3 in 1) 500ml

Properties

    For temporary and permanent fixation
    Easy to use
    Fast and strong
    Moisture resistant

    Technical documentation

Suitable for:

For permanently or temporarily bonding paper, cardboard, photos, posters, reproductions, collages, metal foils (aluminium foil) and for the temporary fixation of stencil plates. Also suitable for glueing insulation and decorative materials, such as polyether foam/foam rubber (sound insulation, furniture cushions), felt, textile, leather, cork, polystyrene foam (tempex), to themselves as well as to wood, board, chipboard, glass, concrete and metals.

Handling
Before use:
Working conditions

Do not use at temperatures below +10 °C.
Personal safety

Spray adhesive contains volatile, highly flammable solvents. Appropriate precautions should be taken when using and storing this product. When applying product to larger surfaces, ensure good ventilation in the working area.
Surface requirements

The areas to be glued must be dry and free of any dust or grease.
During use:
Directions for use

    Shake aerosol spray can well prior to use.
    Rock solid bond: Immediate fixation: Apply adhesive to both sides. Allow to dry for at least 10 minutes, join parts and press or tap. No adjustments possible. Adjustable fixation: It is also possible to apply adhesive to one side and join the parts immediately. Adjustments are possible within 5 minutes, approx. drying time 24 hours.
    Reusable bond: Apply adhesive to one side (not the substrate). Allow to dry for at least 20 minutes, join parts and press well. The bonded object is now self-adhesive and can be removed and fixed again.
    After spraying, hold can upside down and press spray head until only propellant and no more adhesive comes out. This prevents clogging up of spray can.

Points of attention

    Pressurized container. Protect from sunlight and do not expose to temperatures exceeding 50°C. Do not pierce or burn, even after use. Throw away only when completely empty. Do not breathe vapour. Do not spray on a naked flame or any incandescent material. Keep away from sources of ignition – Do not smoke. Without adequate ventilation accumulation of potentially explosive alloys possible. Keep out of reach of children.

After use:
Stains/residue

Remove fresh stains immediately with benzine. Let dried stains soak in benzine.
Storage conditions

Store in a dry, cool and frost free place.