• New
40 × 40 × 10 mm 12 V Fan for 3D Printers
search
  • 40 × 40 × 10 mm 12 V Fan for 3D Printers

40 × 40 × 10 mm 12 V DC 2-Wire Fan for 3D Printers

€2.15

Compact 40 × 40 × 10 mm fan operating from 12 V DC, with a rated speed of 6500 RPM and an airflow of 9.8 CFM. It features two wires, a 2-pin connector with 2.0 mm pitch and a 13 cm cable.

Quantity

 

Security policy

 

Delivery policy

This compact 40 mm axial fan is designed to cool 3D printers, electronic enclosures, power supplies and other equipment operating from a 12 V DC supply.

With a rated speed of 6500 RPM, it provides approximately 9.8 CFM of airflow, equivalent to around 16.6 m³/h, helping to dissipate heat generated by electronic components.

Connection is provided through two wires and a 2-pin, 2.0 mm-pitch connector. As it uses only two conductors, it provides positive and negative power connections but does not include separate PWM-control or speed-sensing signals.

Its sleeve-type friction bearing provides an economical solution for cooling and replacement applications in compatible equipment.

Main features

  • Compact 40 mm axial fan
  • Rated for 12 V DC
  • 6500 RPM rated speed
  • 9.8 CFM airflow
  • Approximately 15 dB rated noise level
  • Two-wire connection
  • 2-pin connector with 2.0 mm pitch
  • 13 cm cable
  • Sleeve-type friction bearing
  • Suitable for 3D printers and electronic equipment
  • Sold individually

Technical specifications

  • Type: axial cooling fan
  • Rated voltage: 12 V DC
  • Rated current: 0.11 A ± 0.02 A
  • Approximate rated power: 1.32 W
  • Rated speed: 6500 RPM ± 10%
  • Airflow: 9.8 CFM
  • Approximate airflow: 16.6 m³/h
  • Rated noise level: 15 dB ± 10%
  • Bearing type: friction / sleeve bearing
  • Number of wires: 2
  • Connector: 2-pin
  • Connector pitch: 2.0 mm
  • Cable length: 13 cm
  • Width: 40 mm
  • Height: 40 mm
  • Thickness: 10 mm
  • Dedicated PWM control: no
  • Dedicated speed-sensing signal: no
  • Quantity: 1 piece

Recommended applications

  • 3D printers
  • Hotend or electronics-compartment cooling
  • Electronic project enclosures
  • Power supplies
  • Compact computer equipment
  • Electronic controllers and modules
  • Automation systems
  • Replacement of compatible 40 × 40 × 10 mm fans

Package contents

  • 1 fan measuring 40 × 40 × 10 mm, rated for 12 V DC, with cable and 2-pin connector

Important note

Before installation, confirm the dimensions, 12 V DC supply voltage, connector pitch and contact arrangement. Although the fan uses a 2-pin connector with 2.0 mm pitch, the contact order may vary between different equipment.

Always verify polarity before connecting the fan. Reversed polarity may prevent operation or damage the component.

This model uses only two wires and therefore has no separate PWM-control or speed-sensing connection. A suitable 12 V DC voltage controller is required if speed adjustment is needed.

100294

Data sheet

Local do artigo na loja
CTP051