- New
F15A 250 V AC Fast-Acting Glass Fuse Ø5 × 20 mm
€0.35
Miniature fast-acting glass fuse rated at 15 A and 250 V AC, with a 150 A breaking capacity. Its standard 5 × 20 mm format is suitable for compatible fuse holders.
Security policy
Delivery policy
The F15A Fast-Acting Glass Fuse is designed to protect electrical circuits and equipment against overcurrent conditions.
Its fast-acting characteristic, identified by the letter F, enables it to interrupt the circuit rapidly when the current exceeds the specified limits. It is particularly suitable for circuits without high start-up currents and for components requiring a fast response to overloads or faults.
The transparent glass body allows the fuse element to be inspected visually. Its nickel-plated brass end caps provide reliable electrical conductivity and improved resistance to oxidation.
Measuring 5 × 20 mm, with a 15 A current rating and a maximum voltage of 250 V AC, the fuse must be installed in a holder with the correct dimensions and current capacity.
Main features
- Type: miniature glass fuse
- Operating characteristic: fast-acting
- Designation: F15A
- Rated current: 15 A
- Maximum rated voltage: 250 V AC
- Breaking capacity: 150 A
- Dimensions: Ø5 × 20 mm
- Maximum opening time at 10 × rated current: 40 ms
- Maximum voltage drop: 130 mV
- Contact material: brass
- Contact plating: nickel
- Sale unit: one fuse
Meaning of the F15A marking
- F: fast-acting fuse
- 15A: rated current of 15 amperes
- 250 V AC: maximum operating voltage
- 5 × 20 mm: physical fuse size
Recommended applications
- Power supplies
- Electronic equipment
- Amplifiers and audio equipment
- Electrical appliances
- Control panels
- Test and measurement equipment
- Circuit repair and maintenance
- General overcurrent protection
Important note
Always replace the fuse with one having the same dimensions, rated current, voltage, breaking capacity and operating characteristic.
Do not replace an F15A fuse with a slow-blow fuse, a higher current rating or a direct electrical connection. Confirm that the fuse holder, circuit-board tracks and wiring are suitable for a current of 15 A.
A blown fuse must not be repaired or reused. Identify and correct the cause of the overcurrent before installing a replacement.
160161
Data sheet
- Local do artigo na loja
- EL0037
15 other products in the same category:
Miniature fast-acting glass fuse rated at 15 A and 250 V AC, with a 150 A breaking capacity. Its standard 5 × 20 mm format is suitable for compatible fuse holders.