The Goobay 50741 is a 10 metre SAT coaxial cable intended for TV, satellite and RF signal distribution in compatible systems.

With F male connectors on both ends, it allows direct connection between SAT wall sockets, satellite receivers, TVs, splitters, taps, multiswitches and other equipment using type F coaxial connection.

The 75Ω impedance makes this cable suitable for television, satellite and digital SD/HDTV signal applications. The 80dB shielding, combined with the 2x shielded construction, helps reduce external interference and signal quality loss.

The cable uses shielding made from aluminium foil and 112x aluminium braid, with a 0.5mm CCS inner conductor. The connectors are moulded and shielded, providing protection against dust, dirt and normal mechanical stress during use.

With a white PVC outer jacket and approximate 5.3mm cable diameter, it is a practical solution for home installations, TVs, SAT receivers, distribution systems and replacement of existing coaxial cables.

Main features

SAT coaxial cable
Manufacturer / brand: Goobay
Reference: 50741
Cable type: coaxial cable
Length: 10m
Colour: white
Connector A: F male
Connector B: F male
Connectors: fully shielded / moulded
Contacts: nickel-plated
Impedance: 75Ω
Shielding: 80dB
Number of shields: 2x
Shield type 1: aluminium foil
Shield type 2: 112x aluminium braid
Inner conductor material: CCS
Inner conductor diameter: 0.5mm
Approximate cable jacket diameter: 5.3mm
Outer jacket material: PVC
Compatible signals: digital SD / HDTV, depending on equipment used
Main application: SAT / TV / RF connection with F connectors
Packaging: Bulk, according to supplier information
Listed markings / certifications: CE / WEEE
Suitable for indoor television and satellite installations

Recommended applications

Connecting satellite receiver to SAT wall socket
Connecting satellite dish to compatible equipment
TVs with compatible F input
SAT splitters and taps
Multiswitches and distribution systems
Home TV/SAT installations
Replacement of damaged or short coaxial cables
Digital SD/HDTV signal transmission
75Ω RF systems with F connection
Organising installations with a white 10m cable

Important note

Before use, always confirm connector compatibility, impedance, required length, signal type, acceptable losses, cable route and equipment being used.

This cable has F male connectors on both ends and 75Ω impedance, making it suitable for compatible TV, satellite and RF systems. It should not be confused with 50Ω coaxial cable commonly used in amateur radio and RF communication systems.

For best results, avoid tight bends, cable crushing, routing close to strong interference sources and poorly tightened connections. For outdoor installations or damp areas, always use outdoor-rated components and suitable moisture protection.