• New
T30-0 Toroidal Core 100–300 MHz
search
  • T30-0 Toroidal Core 100–300 MHz

T30-0 Iron Powder Toroidal Core – 100 to 300 MHz

€0.50

T30-0 iron powder toroidal core made from Mix 0 material for radio-frequency circuits between 100 and 300 MHz. It features an initial permeability of 1 and compact dimensions of 7.8 × 3.84 × 3.25 mm.

Quantity

 

Security policy

 

Delivery policy

The T30-0 is a compact iron powder toroidal core designed for constructing inductors, coils and radio-frequency circuits.

Its Mix 0 material has a very low initial permeability, with a nominal value of µi = 1, making it particularly suitable for high-frequency applications between 100 and 300 MHz.

The toroidal shape helps contain the magnetic field within the core, reducing magnetic leakage and interaction with nearby components. It can be used in filters, tuned circuits, impedance-matching networks and other RF assemblies.

Its compact dimensions make it suitable for small equipment, amateur radio projects, prototypes and high-frequency electronic circuits.

Main features

  • Iron powder toroidal core
  • Mix 0 material
  • Designed for high-frequency applications
  • Recommended range of 100 to 300 MHz
  • Nominal initial permeability of 1
  • Nominal inductance factor of 0.6 nH/N²
  • Compact design
  • Natural light tan colour
  • Suitable for custom windings

Technical specifications

  • Model: T30-0
  • Type: toroidal core
  • Material: iron powder
  • Mix: Mix 0
  • Recommended frequency range: 100–300 MHz
  • Initial permeability (µi): 1
  • AL inductance factor: 0.6 nH/N²
  • Outside diameter: 7.80 mm
  • Inside diameter: 3.84 mm
  • Height: 3.25 mm
  • Colour: light tan / natural
  • Winding included: no

Approximate inductance calculation

Inductance can be estimated using the following formula:

L (nH) = 0.6 × N²

Where N is the number of turns.

The resulting value is approximate and may vary depending on material tolerance, winding arrangement, operating frequency and measurement method.

Recommended applications

  • Radio-frequency inductors
  • VHF and UHF filters
  • Tuned circuits
  • Impedance-matching networks
  • Oscillators and resonant circuits
  • Amateur radio projects
  • Communications equipment
  • High-frequency electronic prototypes

Package contents

  • 1 × Amidon T30-0 toroidal core

Important note

This product is supplied as a bare toroidal core, without wire or winding. The number of turns, wire diameter and winding arrangement must be selected according to the required inductance and operating frequency.

It should not be confused with a ferrite core. The T30-0 is manufactured from Mix 0 iron powder and is intended primarily for high-frequency RF applications.

030000

Data sheet

Local do artigo na loja
M003

Specific References

MPN
T30-0
New