• New
DXpatrol GPSDO V3.2 – 4 Outputs up to 350 MHz
search
  • DXpatrol GPSDO V3.2 – 4 Outputs up to 350 MHz
  • DXpatrol GPSDO V3.2 – 4 Outputs up to 350 MHz
  • DXpatrol GPSDO V3.2 – 4 Outputs up to 350 MHz
  • DXpatrol GPSDO V3.2 – 4 Outputs up to 350 MHz
  • DXpatrol GPSDO V3.2 – 4 Outputs up to 350 MHz
  • DXpatrol GPSDO V3.2 – 4 Outputs up to 350 MHz

DXpatrol GPSDO V3.2 with 4 Programmable Outputs – 350 kHz to 350 MHz

€180.00

GPS-disciplined reference oscillator with four independent LVCMOS outputs, programmable from 350 kHz to 350 MHz, a 1PPS output, 1 mHz resolution, Wi-Fi, NTP and USB‑C connectivity for power and NMEA data.

Quantity

 

Security policy

 

Delivery policy

The DXpatrol GPSDO V3.2 is a high-precision frequency and time source designed for amateur radio, SDR systems, microwave equipment, transverters, laboratory instruments and other applications requiring a stable reference.

The unit uses a u-blox 7N GNSS receiver to discipline an internal 10 MHz OCXO, continuously correcting oscillator drift using signals received from navigation satellites. This provides excellent long-term stability and reduces frequency changes caused by temperature and component ageing.

It offers four independent LVCMOS outputs, each programmable between 350 kHz and 350 MHz with a resolution of 1 millihertz. The phase of each output can also be adjusted independently from 0 to 360°.

Configuration can be performed using the OLED display and rotary encoder or over Wi-Fi using a computer or smartphone. A QR code shown on the display provides convenient access to the configuration interface.

The V3.2 version uses USB‑C for power and NMEA data transmission, allowing connection to software compatible with u-center. Its NTP function can synchronise computers and local networks to satellite-derived time, even when no Internet connection is available.

Main features

  • High-stability multi-frequency GPSDO
  • Four independent LVCMOS outputs
  • Programmable frequencies from 350 kHz to 350 MHz
  • 1 mHz frequency resolution
  • Independent phase adjustment from 0 to 360°
  • Dedicated 1PPS output
  • Internal GNSS-disciplined 10 MHz OCXO
  • Low-phase-noise PLL
  • Less than 0.7 ps RMS jitter
  • GPS, GLONASS and Galileo support
  • USB‑C power and NMEA data
  • Wi-Fi configuration
  • Access point or client operation
  • Computer and smartphone interface
  • NTP server function
  • OLED display and rotary encoder
  • UTC time, locator, coordinates and satellite information
  • Upgradeable firmware

Technical specifications

  • Brand: DXpatrol
  • Model: GPSDO V3.2
  • Type: GPS/GNSS-disciplined oscillator
  • GNSS receiver: u-blox 7N
  • Supported constellations: GPS, GLONASS and Galileo
  • Internal oscillator: 10 MHz CTI OCXO
  • Stated OCXO stability: 0.05 ppb
  • Number of programmable outputs: 4
  • Output type: LVCMOS
  • Frequency range: 350 kHz to 350 MHz
  • Resolution: 0.001 Hz / 1 mHz
  • Phase adjustment: 0 to 360° per output
  • RMS jitter: less than 0.7 ps
  • Timing output: 1PPS
  • Output connectors: SMA
  • Data: NMEA over USB‑C
  • Power supply: USB‑C
  • Local control: OLED display and rotary encoder
  • Remote control: Wi-Fi and web interface
  • Network function: NTP server
  • Approximate lock time: around 1 minute with good GNSS reception
  • Start-up current: approximately 350 mA
  • Current after lock: approximately 270 mA
  • Operating temperature: 0 to 75 °C
  • Approximate dimensions: 84 × 71 × 25 mm
  • Enclosure: metal

Displayed information

  • Waiting and synchronisation status
  • GNSS lock indication
  • Delta correction factor
  • UTC time
  • Geographic coordinates
  • Station locator
  • Number of received satellites
  • Frequency and phase configured for each output
  • Wi-Fi address and connection status

Recommended applications

  • External 10 MHz reference for transverters and converters
  • QO-100 system stabilisation
  • SDR equipment and communications receivers
  • Amateur radio transmitters and beacons
  • Microwave and millimetre-wave systems
  • Laboratory instrument calibration
  • Frequency-counter synchronisation
  • FT8, WSPR, JT65 and other digital modes
  • NTP computer time synchronisation
  • Expeditions and remote stations without reliable Internet access

Package contents

  • 1 DXpatrol GPSDO V3.2
  • 1 GPS/GNSS antenna with an approximately 3-metre cable

Important note

For fast and stable synchronisation, install the GNSS antenna in a location with a clear view of the sky. Initial lock may take longer if the antenna is indoors or partially obstructed.

The antenna connector supplies DC power for an active antenna. Avoid short circuits and do not connect incompatible devices to this port.

The configurable 1 mHz resolution should not be confused with absolute output accuracy, which depends on GNSS lock, reception conditions and OCXO stabilisation.

The USB‑C cable, power supply, SMA cables and other accessories are not stated as included.

170210
New