12.5µF 450V Motor Capacitor Ø35x65mm with 6.3mm Terminals and M8 Stud

This 12.5µF 450V motor capacitor is intended for use in single-phase electric motors and other equipment requiring an auxiliary capacitor for starting or running, according to the original circuit.

With 12.5µF capacitance, 450V rated voltage and a cylindrical body measuring approximately 35mm in diameter by 65mm in length, this component is suitable for replacement in equipment where the value, voltage, dimensions and connection type are compatible.

The 6.3mm Faston terminals allow quick electrical connection using push-on connectors, making replacement practical in equipment using this connection type. The M8 mounting stud allows the capacitor to be fixed to brackets, chassis or dedicated mounting points in the equipment.

It is a common solution for repair and maintenance of motors used in fans, water pumps, small compressors, machines, household appliances and other electrical equipment requiring a motor capacitor with equivalent specifications.

Main features

Motor capacitor
Capacitance: 12.5µF
Rated voltage: 450V
Approximate dimensions: Ø35 x 65mm
Connection type: Faston terminals
Terminal width: 6.3mm
Mounting: M8 stud
Shape: cylindrical
Main application: single-phase electric motors
Category: motor start / motor capacitors
Non-polarized component
Suitable for repair and maintenance of compatible equipment

Recommended applications

Single-phase electric motors
Start and run circuits in compatible motors
Fans
Water pumps
Small compressors
Machines and electrical equipment
Household appliances with single-phase motors
Motor repair
Replacement of equivalent capacitors
Maintenance of equipment using a 12.5µF / 450V capacitor
Applications requiring 6.3mm Faston terminals and M8 mounting

Important note

Before replacement, always confirm the capacitance, rated voltage, physical dimensions, connection type, mounting type, safety class, operating frequency and compatibility with the original motor.

The replacement capacitor should have the same 12.5µF value or the value allowed by the equipment manufacturer, a voltage rating equal to or higher than the original and dimensions compatible with the available space. Using an incorrect value may cause poor starting, motor overheating, loss of torque, vibration, noise or equipment failure.

Also confirm whether the original equipment uses 6.3mm Faston terminals and M8 stud mounting, as similar versions may exist with wires or other connection types.

Always work with the equipment disconnected from mains power and discharge the capacitor before handling. In equipment connected to 230V AC, installation should be carried out by a qualified person or someone with suitable electrical safety knowledge.