HD - 10m fiberglass mast (reinforced)

10m 'Heavy Duty' fibre glass mast, reinforced version. Sizes comparable to the standard 10m mast, but much more solid.


The diameter of the topmost tube is approx. 11mm, the lower most tube has a diameter of 45.8 mm at the lower end. The wall thickness is approx. 1 mm at the top and approx. 2 mm at the lower tubes. This makes this fibre glas mast nearly rigid, the mas tcan carry lightweight small yagi antennas, LogPer antennas or light wires. But also cameras, small anemometers or small lights can be mouted at the top. The HD fibre glas mast consists of ten segments, the extended length is slightly more than 10m, transport length is 117cm. Weight 1.7kg.


The lower most tube is closed with a rubber plug which aligns with the diameter of the lower tube. I.e. the plug does not contribute to the diameter. This plug is glued into the lower most tube and can not be removed. The result is that segments which are not required can not be removed. Just leave not required segments inside the lower most tube.


Diameters of all tubes at the topmost end (all values approximative): 11, 14.5, 17.1, 20.7, 24.3, 27.5, 31.1, 34.6, 38.6, 43.2 mm.