![STC-3028 DIGITAL THERMOSTAT TEMPERATURE AND HUMIDITY CONTROLLER 12V STC-3028 DIGITAL THERMOSTAT TEMPERATURE AND HUMIDITY CONTROLLER 12V](https://shop.inforbatista.pt/13697-large_default/stc-3028-digital-thermostat-temperature-and-humidity-controller-12v.jpg)
![STC-3028 DIGITAL THERMOSTAT TEMPERATURE AND HUMIDITY CONTROLLER 12V STC-3028 DIGITAL THERMOSTAT TEMPERATURE AND HUMIDITY CONTROLLER 12V](https://shop.inforbatista.pt/13697-large_default/stc-3028-digital-thermostat-temperature-and-humidity-controller-12v.jpg)
Security policy
Delivery policy
STC-3028 Thermostat Temperature and Humidity Controller
The STC-3028 automatically controls temperature and humidity simultaneously
Ideal for bird incubators, terrariums, hatchers, brooders.
TECHNICAL SPECIFICATIONS
Working voltage: 12VDC
Power: 1100W Peak *It is recommended not to exceed 200W without the use of solid state relays
1 meter probe measures temperature and humidity
Relay output contact capacity: 10A/240VAC
Measuring temperature range: -50° - +110°
Humidity measurement range: 00% RH + - 100% RH Accuracy: + 1°, 0.1% RH
You will be able to control the temperature and humidity at the same time. It can be connected at the same time with humidifier and dehumidifier equipment.
It can be connected with cooling/heating and humidifier/dehumidifier equipment at the same time.
The heating/cooling function can be set separately for cooling and heating to protect the temperature controller from violent changes. Same as Humidity Control. Temperature and humidity calibration supported Dual display window, can display the measured temperature/humidity and set the temperature/humidity at the same time.
SETTING
Set Start Temperature (Humidity): Press the "up" button once to display the start temperature (humidity). Press and hold the "up" button for about 3 seconds, the required temperature (humidity) can be set by the up and down keys Set the stop temperature (humidity): Press the "down" button once to display the stop temperature (humidity). Press and hold the button for about 3 seconds and the stop temperature (humidity) number flashes. The required temperature (humidity) can be set using the up and down keys. Temperature (humidity) correction: Press the down and up button at the same time.