COOL 300 MBPS Universal WiFi Repeater

Universal Wifi Repeater COOL 300 mbps
This device has Repeater and Amplifier modes. Select one of them.

- Repeater: extends the existing Wifi signal.
- AP: create a new Wifi access for more devices.

Characteristics:
Improves wireless coverage on all WLAN networks
802.11n WLAN for high-speed wireless access
Low compatible with 802.11g (54Mbit / s) and 802.11b (11Mbit / s)
Support for 2.4 Ghz WLAN networks
Maximum WLAN security with WPA2, WPA and WEP (128/64)
Wizard software for easy setup
Integrated antennas
Product blister measurements: 11.7 x 6.5 x 11.7 cm
Connect the device:

1. Plug the device into an outlet near the router. Wait for 15 seconds, and the Wifi repeater will connect.

2. Find the “Wireless-N-c” signal and click to connect.

3. After connecting, the administration page will open automatically on your mobile or manually on your computer
(Enter the browser and type the IP address 192.168.10.1 in the URL bar to enter).

- User: admin
- Password: admin

Amplifier Mode:

- Complete steps 1, 2 and 3 above. Then on the browser page select AP Mode.

- Put name and password to the Wifi access point.

- Connect the home router to the repeater through a LAN port.

Repeater mode:

- Complete steps 1, 2 and 3 above. Then on the browser page select Repeater Mode.

- The repeater will search for available Wifi signals automatically. Choose the signal you want to use.

- Enter the password of the Wi-Fi signal selected in the previous step of Amplifier Mode.

- (Optional). You can change the name of the Wifi network and the password. Click OK to save the settings.

- Close the browser. Open the list of Wi-Fi networks and look for the new Wi-Fi signal from the repeater. Enter your password to access the Internet.