DC / DC Converter DC/DC 10-60V (IN) - 12-83 VDC (OUT) 20A step up

   Module model: SZ-BT07CCCV-D1

    Input voltage: DC10-60V

    Output voltage:

        12-90V continuously adjustable (default output is adjusted to 19V)

        12-90V fixed output

    Input anti-reverse connection: Yes

    Low battery protection: self-recovery (8-50V adjustable)

    Input overcurrent protection: Yes

    Short circuit protection: Yes

Description:

Since the input current is 30A at 10-30V and the input current is 25A at 31-60V, the output power is related to the input voltage. The higher the input voltage, the higher the power (the input voltage * input current is equal to the power of the whole machine). For example, the input 12V*30A power is 360W. The input 24V*30A is 720W. When the input voltage is 36V, the input current is the maximum power of 25A for 900W.
Features:

   

    Output voltage:

        12-90V continuously adjustable (default output is adjusted to 19V)

        12-90V fixed output

    Output current: 20A MAX More than 15A, please strengthen the heat dissipation (related to the input and output voltage difference, the larger the differential pressure, the smaller the output current)

    Constant current range: 0.8-20A (+/-0.3A)

    Input anti-reverse connection: Yes (150A power MOS anti-reverse)

    Low battery protection: self-recovery (8-50V adjustable)

    Working temperature: -40~+85 degrees (enhance heat dissipation when the ambient temperature is too high)

    Working frequency: 150KHz

    Conversion efficiency: 92%-97% (efficiency is related to input, output voltage, current, differential pressure. Low differential pressure)

    Input overcurrent protection: Yes (input over 35A, automatic protection, power does not boost)

    Short circuit protection: Yes (input 30A fuse) Double short circuit protection, safer to use.

    Input reverse connection protection: Yes (150A power MOS tube anti-reverse. Can be reversed for a long time)

    Installation method: 43mm copper columns

    Wiring method: terminal block (please use high current pure copper wire)

    Module size: length 130mm x 52mm x 84mm

    Module weight: 490 grams

    Output power:

        Input voltage * 30A, such as: input 12V * 30A = 360W The maximum power when inputting 12V is 360W

        Input voltage *30A For example: input 24V * 30A = 720W, that is: the maximum power is 720W when inputting 24V



    The output polarity cannot be reversed or short circuit.

    When using batteries as the input source, you must lower the battery protection, otherwise it will damage the battery and power supply.

    Input power supply voltage must be above 10V.

    When the power supply is used for the input power supply, the input power and the output voltage of the input power supply are the first to be unloaded. Then pick up the load. (must ensure that the switching power supply has been working).

    When the constant current mode is used to set the voltage, the constant voltage must be higher than the input voltage.Do not use the way of short circuit output current,the circuit structure of the boost module can not be adjusted in short circuit way.

    If the input voltage fluctuation range is lower than the set output voltage,then the output voltage is constant, it is to ensure that input is lower than the output voltage.