Liquid flow 15ml - JBC FL-15 (FL9582)

FL-15 is a liquid flux designed to be used in preparing printed circuits prior to soldering/desoldering SMD components.

How to use:

1. Clean and degrease the surfaces to be welded.

2. Use the brush to apply flux to the circuit pins

3. Solder the component.

4. Flux remains are inert and do not cause electrical or chemical problems.

Composition:

- Solvent: water (resistivity> 106 ohms)

- Chlorine index: chlorine-free

- Acid value: 35 mg/ml

- Corrosion: None

- Insulation resistance: > 10 Gsq

- Ionic contamination: <3mg/cm2 (double wave welding)