![3D Filament - 1.75mm PETG - Blue - 1Kg - Devil Design 3D Filament - 1.75mm PETG - Blue - 1Kg - Devil Design](https://shop.inforbatista.pt/13711-large_default/3d-filament-175mm-petg-blue-1kg-devil-design.jpg)
![3D Filament - 1.75mm PETG - Blue - 1Kg - Devil Design 3D Filament - 1.75mm PETG - Blue - 1Kg - Devil Design](https://shop.inforbatista.pt/13711-large_default/3d-filament-175mm-petg-blue-1kg-devil-design.jpg)
Security policy
Delivery policy
Product description:
PET-G filament: a thermoplastic polymer from the group of polyesters in the form of
fiber, used for 3D printing with the FFF method. Filament wound on a spool, vacuum packed with moisture absorbent. The spool contains 1 kg of net material. It can be used on all FFF printers that are not protected from third party vendors and open source frameworks before use. PET-G is a beginner-friendly material,
Material available in coating and transparent colors.
Product physical properties:
Suggested printing parameters:
Due to structural differences in printers, the above figures should be considered
as guidelines and the corresponding values must be determined experimentally.
Filament diameter: 1.75mm
Filament dimensional tolerance: +/- 0.05mm
Filament roundness: +/- 0.02mm
Material surface: high gloss
Material shrinkage: Very low
Product weight: 1.0 kg net, 1.36 kg gross
Reel - material: Transparent polycarbonate
Reel Weight: Empty ~ 250g
The diameter of the reel: 200 mm.
Spool width: ~ 70 mm
Mounting hole diameter: 52mm
Packing: Printed cardboard
Package size: ~ 205x205x80 mm
Vacuum packed: Yes
Moisture absorber: Yes
Hotend: 220-250 ° C
Heated bed: 70-80 ° C
Print cooling: Optional