Universal remote control for garage 433Mhz (4 keys)

English:Features:

1. 433Mhz Remote Cloner: This is a fixed frequency (433Mhz) remote cloner to copy 99.99% common fixed and learning code. With this remote cloner you can clone all 433MHz fixed code key fobs.

2. High Performance: The remote control Adopts RF technology, with long remote control distance and stable signal. Long transmission distance, omnidirectional, high sensitivity transmission, no signal blocker. Distance up to 50-100 meters.

3. High Quality: Made of quality material, durable and practical. Portable size is easy to store and carry. It is the latest modern design and technology equals a simply smarter and unique remote control.

4. 4 Keys: With 4 programmable function keys. Single key operation for each password. Can be flexibly set in quantity and operating modes.

5. Wide Application: It is widely used in industrial control and security fields, such as light, motor, remote control, wireless security alarm, wireless door alarm, wireless controller, etc. Wireless remote controller suitable for various intelligence control systems such as electric gate, garage door, machine, etc.

Specifications:

Working voltage: DC12V (27A12V battery included)

Working current: 10mA@12V

Radiation power: 10MW@12V

Transmission frequency: 433MHZ

Transmission distance: 50-100M (open area, the sensitivity of the receiving device is less than 100dbm)

Encoder type: Fixed code. Learning code. Part of the rolling code

Type: ABCD button, lock button

Function: Copy remote control

Size: 6.7*1.7*1.7 (cm)

Works with the following remote control IC modules, and your remote controls must also be fixed code or learning code. AX5326-3. PT2262. PT2260. EV1527. FP527. PT2242. HT600. HT680. HT6207. HT6010. HT6012. HT6014. AX5326 4. SMC918. PT2240. HT6013. HT6013. HT12D,etc

How to program:

Step 1: Delete the existing code from our remote duplicator (it is already factory cleared so step 1 can be skipped)

1) Click and hold buttons A and B together - the LED will flash 3 times

2) Keep holding button A and release button B.

3) Keep holding button A and press button B 3 times - the LED will start flashing non-stop

Now press any key on the remote, the LED lights do not shine, so you have successfully deleted the code; if you press the button, the LED lamp lights up, indicating that the original code is not deleted

Step 2: Clone your original remote

1) Place both remotes facing each other by their backs. Make sure they have direct contact.

2) Click and hold 1 button on your original remote and 1 button on your cloned remote. Continue holding until the LED flashes 2 times, then 3 times, then turns solid and you have successfully cloned it. (the keys on the left follow the same operation above)

If for some reason the clone does not advance more than 2 flashes, it means that the signal is not going through, move the remote control slowly up and down until you reach the point where it will go through.