• New
DXpatrol Modified QO-100 LNB – 25 MHz Reference
search
  • DXpatrol Modified QO-100 LNB – 25 MHz Reference
  • DXpatrol Modified QO-100 LNB – 25 MHz Reference
  • DXpatrol Modified QO-100 LNB – 25 MHz Reference

DXpatrol Modified QO-100 LNB with External 25 MHz Reference Input

€30.00

Modified LNB for receiving the QO-100 amateur radio satellite, featuring an external 25 MHz reference input and support for vertical or horizontal polarisation. An external reference signal is mandatory for operation.

Quantity

 

Security policy

 

Delivery policy

The DXpatrol Modified LNB is specifically prepared for stable reception of the QO-100 geostationary satellite in the 10 GHz band.

In a conventional LNB, the local oscillator frequency can drift with temperature, making narrowband SSB, CW and digital-mode reception difficult. In this version, the internal oscillator is locked to an external 25 MHz reference, providing a more stable conversion frequency suitable for amateur radio communications.

The LNB uses two coaxial connections: one receives the external 25 MHz reference, while the other provides the intermediate-frequency signal at approximately 740 MHz and receives operating power through a Bias-T.

It can be used with the DXpatrol QO-100 Downconverter, DXpatrol RX-Set PLL or another compatible system capable of providing the required 25 MHz reference and LNB power.

Main features

  • Modified specifically for QO-100 reception
  • External 25 MHz reference input
  • Greater frequency stability than a conventional LNB
  • Suitable for SSB, CW and digital-mode reception
  • IF output at approximately 740 MHz
  • Supports vertical or horizontal polarisation
  • Powered through the coaxial cable using a Bias-T
  • F-type coaxial connections
  • Compatible with DXpatrol reception systems
  • Suitable for use with the DXpatrol Helix feed

Technical specifications

  • Brand: DXpatrol
  • Type: externally referenced modified LNB
  • Application: QO-100 satellite reception
  • Reception frequency: 10 GHz band
  • Required external reference: 25 MHz
  • Intermediate frequency: approximately 740 MHz
  • Polarisation: vertical or horizontal
  • Polarisation selection: controlled by supply voltage
  • Power supply: through coaxial cable and Bias-T
  • Connectors: F type
  • Number of coaxial connections: 2
  • Connection 1: 25 MHz reference input
  • Connection 2: IF output and power input
  • Approximate weight: 250 g

Compatible equipment

  • DXpatrol QO-100 Downconverter
  • DXpatrol QO-100 RX-Set PLL
  • DXpatrol QO-100 Groundstation
  • Compatible external 25 MHz reference generators
  • Receivers or SDRs capable of receiving approximately 740 MHz
  • Helix feeds and satellite dish systems

Recommended applications

  • QO-100 narrowband transponder reception
  • SSB and CW monitoring
  • Digital-mode reception
  • Amateur satellite radio stations
  • Frequency-stabilised reception systems
  • Experimental 10 GHz projects
  • Replacement of a damaged modified LNB

Package contents

  • 1 DXpatrol modified QO-100 LNB

Important note

This LNB cannot operate as a standalone unit. It requires an external 25 MHz reference, Bias-T power and a compatible receiver or converter.

It must not be connected as a conventional LNB without the appropriate reference system. The DXpatrol Downconverter and RX-Set PLL provide the connections required for operation.

Identify the 25 MHz reference input before connecting the cables. Do not connect or disconnect coaxial cables while the system is powered, as DC voltage is present on the coaxial line.

The downconverter, reference source, Bias-T, receiver, cables, connectors, Helix feed and satellite dish are not stated as included.

721100
New