The Tagra MAR-CB is a fiberglass CB antenna with 1.50m length, designed for marine applications and compatible CB communication systems.

This model belongs to Tagra’s Marine range and is presented as an omnidirectional base antenna, providing coverage in all horizontal directions. Its 1/2 λ dipole configuration, vertical polarization and 50Ω impedance make it suitable for compatible CB equipment.

The antenna supports up to 10W maximum power and has listed SWR/TOS below 1.5 when correctly installed and used under suitable conditions. It is supplied with 4 metres of RG-58 cable and PL connector, making installation easier in systems using this connection type.

Its fiberglass construction provides good mechanical resistance and protection for outdoor use. The antenna has 55m/s / 200km/h wind resistance, IP66 sealing grade and an operating temperature range from -55°C to +70°C, making it suitable for demanding environments.

With an approximate weight of 0.80kg and package dimensions of 1.6 x 0.1 x 0.1m, the MAR-CB is a practical solution for CB installations on boats, marine systems, fixed stations or applications requiring a vertical fiberglass antenna.

Main features

Fiberglass CB antenna
Manufacturer / brand: Tagra
Model / reference: MAR-CB
Category: Marine
Antenna type: omnidirectional base antenna
Electrical type: 1/2 λ dipole
Main application: CB
Material: fiberglass
Maximum power: 10W
Impedance: 50Ω
SWR / TOS: <1.5
Connector type: PL
Polarization: vertical
Wind resistance: 55m/s / 200km/h
Operating temperature: -55°C to +70°C
Sealing grade: IP66
Included cable: 4m RG-58
Antenna length: 1.50m
Approximate weight: 0.80kg
Approximate package dimensions: 1.6 x 0.1 x 0.1m
Suitable for compatible CB systems and marine applications

Recommended applications

Compatible CB communications
Marine applications
Boat installations
Stations requiring an omnidirectional antenna
50Ω systems
Outdoor installations exposed to wind and humidity
Replacement of damaged marine CB antennas
Installations requiring included RG-58 cable
Use with compatible PL connector systems
Technical, nautical and communication installations

Important note

Before purchase and installation, always confirm CB equipment compatibility, operating frequency, connector type, transmitter power, mounting location, support type, coaxial cable, ground/earth where applicable and current regulations.

The antenna must be installed securely, in a suitable location and away from obstacles that may reduce performance or compromise safety. Before transmitting, checking SWR with suitable equipment is recommended.

Use on CB must always comply with the legal rules of the country of use, including authorised channels, permitted power and equipment type. This item corresponds only to the Tagra MAR-CB antenna with RG-58 cable. Mount, mast, radio, additional plugs/adapters and other installation accessories are not included unless expressly stated otherwise.