- New
Downconverter for receiving the QO-100 geostationary satellite, supplied with a modified LNB. It converts the received signal to one of four selectable IF frequencies: 28.550 MHz, 144.550 MHz, 432.550 MHz or 1296.550 MHz.
Security policy
Delivery policy
The DXpatrol QO-100 Downconverter is a complete standalone solution for receiving the QO-100 amateur radio satellite through a conventional receiver or transceiver, without requiring a permanently connected computer.
The unit receives the signal from the modified LNB and converts it to one of four selectable amateur radio bands: 10 metres, 2 metres, 70 centimetres or 23 centimetres. This allows the QO-100 transponder to be monitored using a radio compatible with the selected IF frequency.
An internal 10 MHz, 0.5 ppm TCXO reference provides stable reception. For applications requiring greater precision, the downconverter can use an external 10 MHz reference from a compatible GPSDO.
The internal preamplifier provides approximately 12 dB of gain, with an adjustable reception level. An LED indicates PLL lock status, allowing easy confirmation of correct operation.
The downconverter also includes a Bias-T for powering the LNB, voltage-controlled polarisation selection and a durable aluminium enclosure.
The stated frequencies correspond to the lower beacon area of the QO-100 transponder. Small frequency variations may occur due to temperature, the LNB or operating conditions.
This unit is intended exclusively for reception. A separate 2.4 GHz uplink system is required to transmit through QO-100.
Do not connect or disconnect coaxial cables while the unit is powered. DC voltage is present on the centre conductor of the LNB cable, and a short circuit may damage the Bias-T circuitry.
The power supply, GPSDO, receiver, coaxial cables, satellite dish and other accessories are not stated as included.