• New
DXpatrol 1 W 2.4 GHz Power Booster – 12 dB
search
  • DXpatrol 1 W 2.4 GHz Power Booster – 12 dB
  • DXpatrol 1 W 2.4 GHz Power Booster – 12 dB
  • DXpatrol 1 W 2.4 GHz Power Booster – 12 dB

DXpatrol 1 W 2.4 GHz Power Booster – 12 dB RF Amplifier

€60.00

Compact RF amplifier covering 2300 to 2500 MHz, with 12 dB gain and a maximum output power of 1 W (+30 dBm). Suitable as a driver for ADALM‑Pluto, SDR equipment and QO-100 systems.

Quantity

 

Security policy

 

Delivery policy

The DXpatrol 1 W 2.4 GHz Power Booster is designed to increase the level of low-power RF signals within the 2300 to 2500 MHz frequency range.

With a nominal gain of 12 dB and a maximum output power of 1 W, it can be used as an intermediate stage between an SDR or other RF signal source and a higher-power amplifier. It is particularly useful in systems based on the ADALM‑Pluto, LimeSDR, HackRF and other compatible equipment.

Its operating range includes the QO-100 satellite uplink frequency, allowing the booster to be used as a driver stage in amateur satellite stations. It is also suitable for experimental projects and laboratory systems operating in the 2.4 GHz band.

The amplifier operates from a simple 5 V DC supply, uses SMA RF connectors and includes a power indicator LED.

Main features

  • RF amplifier for the 2.4 GHz band
  • 2300 to 2500 MHz operating range
  • Maximum output power of 1 W
  • Nominal gain of 12 dB
  • Suitable as a driver for additional amplifiers
  • Compatible with various SDR platforms
  • Simple 5 V DC power supply
  • 50 Ω input and output impedance
  • SMA RF connectors
  • Power indicator LED
  • Compact format for system integration

Technical specifications

  • Brand: DXpatrol
  • Type: RF amplifier / power booster
  • Frequency range: 2300 to 2500 MHz
  • Nominal application frequency: 2.4 GHz
  • RF gain: 12 dB
  • Maximum output power: 1 W / +30 dBm
  • Impedance: 50 Ω
  • Input return loss: approximately 20 dB
  • Noise figure: approximately 4.4 dB
  • Supply voltage: 5 V DC
  • Quiescent current: approximately 150 mA
  • Current at full output: approximately 450 mA
  • RF connectors: SMA
  • Power connection: feed-through capacitor and ground terminal
  • Indicator: LED

Recommended compatibility

  • ADALM‑Pluto
  • LimeSDR
  • HackRF
  • Other SDR equipment with a 2.4 GHz output
  • Low-power RF generators
  • QO-100 upconverters
  • Power amplifiers requiring an RF driver stage

Recommended applications

  • QO-100 amateur satellite stations
  • Driver stage for 2.4 GHz amplifiers
  • Increasing the output level of SDR equipment
  • Experimental microwave projects
  • Laboratory testing and development
  • Transmission systems between 2300 and 2500 MHz
  • Terrestrial operation in the 13 cm amateur band

Package contents

  • 1 DXpatrol 1 W 2.4 GHz Power Booster

Important note

The actual output power depends on the RF level applied to the input. A low-power SDR will benefit from the 12 dB gain, but may not provide sufficient drive to reach the full 1 W output.

Always connect a correctly matched 50 Ω load or antenna before applying power and RF drive. Short, low-loss coaxial cables suitable for 2.4 GHz are recommended.

Provide adequate ventilation and heat dissipation, especially during extended transmissions. Confirm the polarity of the 5 V supply before connection.

The power supply, SMA cables, SDR, antenna and other accessories are not stated as included.

761100